Main Page (index.htm

Home Page

Dry Glove and Ring Systems

Dryglove Terminology & Maintenance

Back

INSTALLATION OF THE DIVING CONCEPTS SNAP-ON^TM DRYGLOVE KIT WITHOUT AN INNER LATEX WRIST SEAL

	Open the end of your latex wrist seal on your drysuit and push the suit connector inside the latex seal of the suit. Once it is inside the latex seal, turn it 90 degrees to the orientation shown in this photo. The glove side of the suit connector ring should be oriented toward the latex wrist seal opening. Place an outer glove (OG) O-Ring into the first groove behind "the ridge" of the suit connector ring. Note how far the suit connector is placed inside the latex seal. The ring is totally covered by the latex seal and not by the suit material.
	Pull the latex seal over the suit connector ring and toward the suit itself. Once the major ridge is exposed, place an outer glove (OG) O-Ring in the second or third groove away from the major ridge.
	Pull the latex seal over the exposed outer glove (OG) O-Ring to help protect the O-Ring from moving, this will also create a finished look to the attachment of the suit connector to the latex seal.
	The dryglove can then be connected to the suit connector ring. You will have airflow into the glove and your hands will stay warm.
	Your latex seal has now been converted into an easy to use dryglove system. Now you can enjoy warm hands with the Diving Concepts Snap-On^TM Dryglove Kit!

Click here to find out how the Diving Concepts snap on system can help you save a dive should you tear your latex cuff on a dive trip

Š1999-2000 Diving Concepts Inc.